Re-ARM
Support files for Re-ARM
Model: Re-ARM controller for RAMPS
Current Version: 1.0
Product link: Re-ARM product page
Files available for download.
Re-ARM pinout...
Sun, 1 Jan, 2017 at 11:10 PM
This is a quick setup guide to get your Re-ARM board up and running. Here's a detailed RAMPS upgrade guide by Jim Warner Smoothieware is well do...
Sat, 15 Apr, 2017 at 5:43 PM
Re-ARM supports the following LCD displays.
Panucatt Devices Viki2 LCD
Panucatt Devices mini Viki LCD
RRD Full Graphic Smart LCD
RRD smart LCD,...
Fri, 6 Jan, 2017 at 12:38 PM
The Re-ARM board has break out pins for the Panucatt Devices Ethernet module. It plugs directly as shown. Edit your config file to enable the Ethernet fun...
Mon, 2 Jan, 2017 at 1:29 PM
Schematic and PCB files for Re-ARM Controller. Files are licensed under CERN OHL. Schematic and PCB files designed in Diptrace Schematic Capture so...
Mon, 6 Feb, 2017 at 6:44 PM
The Re-ARM board has three on-board Thermistor analog inputs that can be used if the shield (RAMPS) in use causes noise on the analog pins. These on-board i...
Wed, 1 Nov, 2017 at 1:28 PM